FAYNAQ.COM - For Modern Pipeing Systems

| عـربي |
Default home page
subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link
subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link

Thermal Pipes Systems

small logo

BOR plus systems

Pipes and fittings made of PP-3 (PPR) for tap water - hot & cold
and radiatpr heating installations

Description

BOR plus system is manufactured in Sochaczew using guaranteed quality raw material - type 3 polypropylene in gray colour. Due to the carefully choosen properties of this material BOR plaus system can be used for constructing tab water, radiator heating and air condition installations inside buildings as well as industrial pipelines of compressed air and chemicals for action of which pipes and fittings should be very resistant (PP type 3 is resistant for impact of over 300 different kinds of substances).

The BOR Plus system is also especially recommended for use in the renovation of old installations, in all types of buildings. The main advantage of the BOR Plus system is the fact that joints are made using polymer fusion at a temperature of 260-280c (the fiting then becomes welded to the pipe forming a single material). This means that a well-made joint is theoretically stronger than the pipe itself, whereas the joints are normally thought to be the weakest point of a system.

Possibility of connecting to any type of installation.


Assembly guaranteed to provide totally leakproof joints.



Advantages of the BOR Plus system

  • High durability - minimum 50 years' use.
  • Low coefficient of absolute roughness (0.007mm).
  • Low level of hydraulic loss, no possibility of crusting.
  • Low noise level.
  • Total resistance to corrosion.
  • Hygienic - PP-3 is non-toxic and does not react with water.
  • Light weight.
  • Low thermal conductivity coefficient - 0,2 W/mK.
  • Oscillation damping qualities - resistace to hydraulic surges.
  • Low cost of equipment required for making joints.
  • Resistant to over 300 chemical compounds.
  • Assemply guaranteed to provide totally leakproof joints and ability to connect to any type of installation.

Certificates and guarantees

  • COBRTI INSTAL technical certificate.
  • DVGW certificate.
  • PZH hygiene certificate.
  • ISO 9002 - Uponor Polska.
  • ISO 14001 and ISO 9001 - Uponor Group.
  • System insured up to a sum of 1 000 000 EUR.
  • Guaranteed for 10 years.


Show the Movie

Catalogue

 

About Us | Contact Us | ©2007 Gulf Faynaq